3M 1860 N95 Mask details
3M 1860 N95 surgical mask contains no components made from natural rubber latex. It meets CDC guidelines for Mycobacterium tuberculosis exposure control. As a surgical mask, it is fluid resistant to splash and spatter of blood and other infectious materials. It also provides >99% BFE2 against wearer generated micro-organisms. it complies with the OSHA Bloodborne Pathogens Standard. Tested against particles approximately 0. 3-micron particle (mass median aerodynamic diameter) per US 42 CFR 84. Bacterial Filtration Efficiency (BFE) determined by the ASTM F2101 test method. Fluid resistant according to ASTM F1862.
|N95 TC Number||TC-84A-0006|
|Strap Attachment Type||Braided Comfort Strap|
|Quantity Per Box||20pcs|
|Shelf Life||5 Years|
- Surgical N95 mask for use as healthcare.
- Filter efficiency of 95% or greater against particulate aerosols free of oil.
- Provides >99% BFE against wearer-generated micro-organisms according to ASTM F2101.
- Be designed to be fluid resistant to splash and spatter of blood and other infectious materials.
- Complies with the OSHA Blood-borne Pathogens Standard.
- Braided headbands for various facial size
- Cushioning nose foam, and lightweight construction for comfortable wear.
Agricultural Production, Airborne Biological Particles, Bagging, Dry Chemical Handling, Emergency & Pandemic Preparedness, Foundry Operations, Grinding, Petrochemical Manufacturing, Processing of Minerals, Sanding, Textile Operations
Operating Rooms, Clinics, TB Wards, Patient Care, Labor and Delivery, Infection Control Practices, Laboratory, emergency or pandemic preparedness planning, stockpiling, etc.
The 3M 1860 N95 Mask Health Care Particulate Respirator and Surgical Mask are designed to help provide respiratory protection for the wearer. 3M 1860 N95 Mask is NIOSH approved and FDA 510k cleared. FDA Cleared it for use as a surgical mask. This product has a filter efficiency level of 95% or greater against particulate aerosols free of oil1. It is fluid-resistant, disposable, and may be worn in surgery. It can fit a wide range of face sizes. This product meets CDC guidelines for Mycobacterium tuberculosis exposure control. As a respirator, it is intended to reduce wearer exposure to certain airborne particles in a size range of 0. 1to >10. 0 microns, including those generated by electrocautery, laser surgery, and other powered medical instruments.
These respirators help reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 1910.134 including training, fit testing and medical evaluation.
Do Not Use For
- Medical N95 mask not for industrial use.
- Not for use with beards or other facial hair that prevents direct contact between the face and the sealing surface of the respirator.
- OSHA has not set a permissible exposure level for airborne biohazards.
3M 1860 N95 NIOSH Approval Number TC-84A-0006, approval date 8/17/1995
FDA cleared (510K)
3M 1860 passed FDA (510K) Cleared, worthy of consumer
Cautions and Limitations
General Cautions and Limitations for All Part 84A Approvals Non-powered Air-Purifying Particulate Filter Respirators. These limitations are by no means all-inclusive.
FIT-CHECK THE FACE-SEAL AS FOLLOWS:
. Place both hands over the respirator do not disturb the position of the respirator.
. Inhale sharply (a negative pressure should be felt inside the respirator).
. If you detect air-leaks, readjust the head straps and/or the nose-piece.
- The 3M saccharin (sweet) or Bitrix (bitter) qualitative fittest is recommended for this respirator. When used only as a surgical mask, fit testing is not required.
- A respirator may be used until damaged, breathing becomes difficult or contaminated with blood or body fluids. Otherwise, it may be stored and reused according to the facility’s infection control policy.
- Filtering face pieces are to be inspected prior to each used to assure there are no holes in the breathing zone other than the punctures around staples, and no damage has occurred. Enlarged holes resulting from ripped or torn filter material around staple punctures are considered damage. Immediately replace respirator if damaged. Staple perforations do not affect NIOSH supplier approval.
- Discard after every use when used for surgical procedures.
- Not for atmospheres containing less than 19. 5 percent oxygen.
- Not for atmospheres immediately dangerous to life or health.
- Do not exceed maximum-use concentrations established by regulatory standards.
- Failure to properly use and maintain this product could cause injury or death.
- This respirator is designed for occupational/professional use by adults who are properly trained in their use and limitations. Respirators are not designed to be used by children.
What they're saying
This is a great mask I use it to protect myself I always bought this one because of the extra protection. Doesn’ t fog my glasses. Better than any mask I’ ve had so far.
A week later I got the mask package and compared it with the 3M 1860 I had. It’s genuine.
They were two days later than expected, but they were the real deal. The printing on the mask is very clear.